Dolycon CT112 Series Solar Pump Inverter.
Dolycon CT112 Series Solar Pump Inverter
AC/DC input solar pump drive
- AC/DC input solar pump drive
Input Specifications (Solar Side)
- Input Voltage Range
- 250V – 800V DC
- Recommended MPPT Operating Range
- 300V – 750V DC
- Max. DC Input Voltage
- 900V DC
- MPPT Efficiency
- ≥ 99%
- Max. PV Input Power
- Depends on model rating
- Solar Input Type
- Direct PV input (no battery required)
AC Output (Pump Motor Side)
- Output Voltage
- 3-Phase 220V / 380V (model dependent)
- Output Frequency Range
- 0 – 600 Hz
- Compatible Pump Types
- Deep well pump, centrifugal pump, irrigation pump, submersible pump, surface pump
- Motor Compatibility
- AC Induction Motors (Single & Three Phase)
- Output Waveform
- Pure Sine Wave
- Rated Output Power
- Model dependent (CT112 series covers multiple kW ratings)
Operating Features
- MPPT Solar Tracking
- Yes
- Automatic Start/Stop
- Based on sunlight conditions
- Soft Start Function
- Yes (protects pump motor)
- Automatic Sleep Mode
- Triggered in low sunlight
- Dry-Run Protection
- Supported
- Water-Level Monitoring
- Optional sensor support
- AC + Solar Hybrid Mode
- Optional AC input for cloudy days
Protection & Safety
- Overload Protection
- Yes
- Over/Under Voltage Protection
- Yes
- Input Overcurrent Protection
- Yes
- Short-Circuit Protection
- Yes
- Overheat Protection
- Yes
- Dry Pump Protection
- Yes
- Phase Loss Protection
- Yes
- Surge Protection
- Built-in
Environmental Conditions
- Operating Temperature
- -10°C to +45°C (Derating above 45°C)
- Storage Temperature
- -20°C to +60°C
- Cooling Method
- Forced Air Cooling
- Installation Location
- Indoor / Covered Outdoor
- Humidity
- ≤ 95% (non-condensing)
Physical Details
- Mounting Method
- Wall-Mounted
- Enclosure Protection Level
- Typically IP20 / IP21 (Depending on model)
- Dimensions
- Model dependent
- Weight
- Model dependent
Certifications
- Compliance Standards
- CE Certified
- Quality Standard
- Manufacturer QC Tested
- Safety Standards
- Internal protection circuitry compliant with pump-inverter norms